DESIGN AND CONSTRUCTION OF BABY ROCKING AND MONITORING SYSTEM
DOI:
https://doi.org/10.2022/jmet.v14i2.6111Abstract
This paper presents the design and construction of a system for a busy parent that will monitor the condition of the infant whether crying or not as well as pacify the baby by rocking and regulating the nearby temperature. The system transmits the baby’s cry in real time to a receiving device which is with the parent, a wooden cradle incorporated with a DC motor pacifies the baby when a sound signal is received. A temperature sensor is also used to monitor the nearby temperature and send the signal to microcontroller which actuate the fan ON/OFF as programed. The system could transmit the baby’s cry in real-time up to 40 meters away from the receiving device. The system also oscillates at 15o when the system is loaded up to 12kg and the load has no effect on the frequency of oscillation.
Downloads
References
M A, S., U A, N. K., & Ashok, N.," Infant Cradle Monitoring System using IoT", Ijarcce, vol. 8, no. 4, pp. 15–20, 2019.
Srivastava, A., Yashaswini, B. E., Jagnani, A., & Sindhu,"Smart Cradle System for Child Monitoring using IoT" , International Journal of Advance in Scientific Research and Engineering, vol. 3, no. 9, pp. 2764–2768, 2019.
Rachanapalaskar, Akshada Wagh, Shweta Pandey, A. T, "Automatic Baby Cradle and Monitoring for Infant Care", International Journal of Advanced Research in Science and Engineering, vol. 5, no. 5, pp. 55–60, 2016.
Srikanth, S., Ramya, P., Satheesh, M., Philip, G. T., & Vineetha," Smart Baby Cradle System", International Journal of Advance in Scientific Research and Engineering ,, vol. 4, no. 3, pp. 51–60, 2018.
Shastry, S. P., Harshitha, S., Vamsi, R., Lokende, V., & Bhanumathi, K. S," Instrumentation Sensors Based Infant Safety Smart Cradle", International Journal of Advanced Research in Science and Engineering, vol. 4, no. 6, pp. 2–6, 2017.
Joshi, M. P., & Mehetre, "A Survey on Advancement of Baby Cradle" , International Journal of Science and Research, vol. 6, no.7, pp. 1466–1469, 2017.
Kadu, A. B., Dhoble, P. C., Ghate, J. A., Bhure, N. B., & Jhunankar, V. A, "Design, Fabrication and Analysis of Automated Cradle", Int. J. Mech. Eng. & Rob. Res, vol. 3, no. 2, pp. 380–383, 2014.
Sambhar, V. K., & Tadwalkar,"Automatic Cradle System for Infant Care," International Journal of Advanced Research in Science and Engineering, vol. 6, no. 4, pp. 21–24, 2017.
Nathan, S. S., Kumar, S., & Kanmani, M, "Survey on Digital Age- Smarter Cradle System for Enhanced Parenting," International Journal of Applied Engineering Research, vol.13, no 10, pp. 8187-8193, 2018.
Downloads
Published
Issue
Section
License
JMET Copyright Principles
JMET seeks to retain copyright of the articles it publishes, without the authors giving up their right to use their own material.
Originality
The manuscript is neither been published before, nor is it under consideration for publication in any other journals. It contains no matter that is scandalous, obscene, libelous or otherwise contrary to law.
Terms of Acceptance
When the article is accepted for publication, the authors shall hereby agree to transfer to the Journal of Mechanical Engineering and Technology, all rights, including those pertaining to electronic forms and transmissions, under existing copyright laws, except for the following, which the author(s) specifically retain(s):
All proprietary right other than copyright, such as patent rights.
- The right to make further copies of all or part of the published article for my/our use in classroom teaching.
- The right to reuse all or part of this material in a compilation of my/our own works or in a textbook of which I/we am/are the author(s).
- The right to make copies of the published work for internal distribution within the institution that employs me/us.
The authors agree that copies made under these circumstances will continue to carry the copyright notice that appeared in the original published work. The authors agree to inform any co-authors, if any, of the above terms. The authors certify that they have obtained written permission for the use of text, tables, and/or illustrations from any copyrighted source(s), and they agree to supply such written permission(s) to Journal of Mechanical Engineering and Technology upon request.
