Investigation of Bird Strike Damage on Fokker 100 Airplane Wing and Nose
DOI:
https://doi.org/10.2022/jmet.v12i2.5595Abstract
Bird strike or the collision of birds to the flying airplane is one of the common threats which reduces the safety of flying vehicles. Numerical analysis is so important to predict the behavior of airplanes body and nose in birds strike and it plays an important role to reduce the project cost and prevent unexpected damages. In this paper, it is tried to study the influence of birds strike on Fokker 100 airplane using the finite element method. In order to verify the proposed method, an experimental bird strike on a plane is studied. Then birds strike on the airplane wing and nose are numerically studied to investigate the amount of damage due to this phenomenon.
Downloads
References
S. Georgiadis, A. J. Gunnion, R. S. Thomson, and B. K. Cartwright, “Bird-strike simulation for certification of the Boeing 787 composite moveable trailing edge,” Compos. Struct., vol. 86, no. 1–3, pp. 258–268, 2008.
“Discover ideas about Montenegro Airlines.” [Online]. Available: https://www.pinterest.cl/pin/462041242996438136/.
J. LIU, Y. LI, X. YU, X. GAO, and Z. LIU, “Design of aircraft structures against threat of bird strikes,” Chinese J. Aeronaut., vol. 31, no. 7, pp. 1535–1558, Jul. 2018.
A. Riccio, R. Cristiano, S. Saputo, and A. Sellitto, “Numerical methodologies for simulating bird-strike on composite wings,” Compos. Struct., vol. 202, pp. 590–602, Oct. 2018.
J. R. Allan, “The costs of bird strikes and bird strike prevention the costs of bird strikes and bird strike prevention,” Hum. Conflicts with Wildl. Econ. Considerations, vol. 18, no. August, pp. 147–153, 2000.
D.-H. Kim and S.-W. Kim, “Evaluation of bird strike-induced damages of helicopter composite fuel tank assembly based on fluid-structure interaction analysis,” Compos. Struct., vol. 210, pp. 676–686, 2019.
D. Hu, B. Song, D. Wang, and Z. Chen, “Experiment and numerical simulation of a full-scale helicopter composite cockpit structure subject to a bird strike,” Compos. Struct., vol. 149, pp. 385–397, Aug. 2016.
S. Heimbs, U. Fischer, W. Theiler, and F. Steenbergen, “Numerical Analysis of Bird Strike Resistance of Helicopter Searchlight,” Procedia Struct. Integr., vol. 5, pp. 689–696, 2017.
C. Hales and M. Czech, “Bird strike Risk for Space Launch Vehicles,” Nov. 2017.
R. Mccarty and R. Smith, “Assessment of bird impact protection provided by the Space Shuttle Orbiter windshield system using the MAGNA computer program,” in 4th Flight Test Conference, 1988.
R. W. Cornell, “Elementary Three-Dimensional Interactive Rotor Blade Impact Analysis,” J. Eng. Power, vol. 98, no. 4, p. 480, Oct. 1976.
I. Smojver and D. Ivančević, “Numerical simulation of bird strike damage prediction in airplane flap structure,” Compos. Struct., vol. 92, no. 9, pp. 2016–2026, Aug. 2010.
F. S. Wang and Z. F. Yue, “Numerical simulation of damage and failure in aircraft windshield structure against bird strike,” Mater. Des., vol. 31, no. 2, pp. 687–695, Feb. 2010.
A. Airoldi and B. Cacchione, “Modelling of impact forces and pressures in Lagrangian bird strike analyses,” Int. J. Impact Eng., vol. 32, no. 10, pp. 1651–1677, Oct. 2006.
A. G. Hanssen, Y. Girard, L. Olovsson, T. Berstad, and M. Langseth, “A numerical model for bird strike of aluminium foam-based sandwich panels,” Int. J. Impact Eng., vol. 32, no. 7, pp. 1127–1144, Jul. 2006.
I. Smojver and D. Ivancevic, “Advanced modelling of bird strike on high lift devices using hybrid Eulerian–Lagrangian formulation,” Aerosp. Sci. Technol., vol. 23, no. 1, pp. 224–232, 2012.
D. Ivančević and I. Smojver, “Hybrid approach in bird strike damage prediction on aeronautical composite structures,” Compos. Struct., vol. 94, no. 1, pp. 15–23, 2011.
J. Liu, Y. Li, X. Gao, and X. Yu, “A numerical model for bird strike on sidewall structure of an aircraft nose,” Chinese J. Aeronaut., vol. 27, no. 3, pp. 542–549, 2014.
Y. Zhou, Y. Sun, and W. Cai, “Bird-striking damage of rotating laminates using SPH-CDM method,” Aerosp. Sci. Technol., vol. 84, pp. 265–272, 2019.
Z. Zhang, L. Li, and D. Zhang, “Effect of arbitrary yaw/pitch angle in bird strike numerical simulation using SPH method,” Aerosp. Sci. Technol., vol. 81, pp. 284–293, Oct. 2018.
S. Orlando, F. Marulo, M. Guida, and F. Timbrato, “Bird strike assessment for a composite wing flap,” Int. J. Crashworthiness, vol. 23, no. 2, pp. 219–235, Mar. 2018.
J. Zhou et al., “Experimental and numerical investigation of high velocity soft impact loading on aircraft materials,” Aerosp. Sci. Technol., vol. 90, pp. 44–58, 2019.
J. Cai, H. Bao, H. Zuo, and Y. Huang, “Safety evaluation of airworthiness requirement of bird-strike on aeroplane,” Eng. Fail. Anal., vol. 102, pp. 407–416, 2019.
F. Di Caprio, D. Cristillo, S. Saputo, M. Guida, and A. Riccio, “Crashworthiness of wing leading edges under bird impact event,” Compos. Struct., vol. 216, pp. 39–52, 2019.
“Fokker 100,” Wikipedia. [Online]. Available: https://en.wikipedia.org/wiki/Fokker_100.
“Bird Strike-Archive 2017.” [Online]. Available: http://www.birdstrike.it/en/index.php?Archive_2017.
L. Iannucci, “Woven composite design for extreme events using a damage mechanics methodology,” vol. 214, no. 2, pp. 99–111, 2000.
N. J. Carpenter, R. L. Taylor, M. G. Katona, N. J. Carpenter, R. L. Taylor, and M. G. Katona, “Lagrange constraints for transient finite element surface contact To cite this version : HAL Id : hal-01389918 lagrange constraints for transient finite,” Int. J. Numer. Methods Eng., vol. 32, no. 1, pp. 103–128, 1991.
M. C. Katona and O. C. Zienkiewicz, “A unified set of single step algorithms part 3: The beta-m method, a generalization of the Newmark scheme,” Int. J. Numer. Methods Eng., vol. 21, no. 7, pp. 1345–1359, Jul. 1985.
J. S. Wilbeck, “Impact behavior of low strength projectiles (No. AFML-TR-77-134),” 1978.
“FOKKER 100 GENERAL.” [Online]. Available: http://www.fokker-aircraft.info/f100general.htm.
Downloads
Published
Issue
Section
License
JMET Copyright Principles
JMET seeks to retain copyright of the articles it publishes, without the authors giving up their right to use their own material.
Originality
The manuscript is neither been published before, nor is it under consideration for publication in any other journals. It contains no matter that is scandalous, obscene, libelous or otherwise contrary to law.
Terms of Acceptance
When the article is accepted for publication, the authors shall hereby agree to transfer to the Journal of Mechanical Engineering and Technology, all rights, including those pertaining to electronic forms and transmissions, under existing copyright laws, except for the following, which the author(s) specifically retain(s):
All proprietary right other than copyright, such as patent rights.
- The right to make further copies of all or part of the published article for my/our use in classroom teaching.
- The right to reuse all or part of this material in a compilation of my/our own works or in a textbook of which I/we am/are the author(s).
- The right to make copies of the published work for internal distribution within the institution that employs me/us.
The authors agree that copies made under these circumstances will continue to carry the copyright notice that appeared in the original published work. The authors agree to inform any co-authors, if any, of the above terms. The authors certify that they have obtained written permission for the use of text, tables, and/or illustrations from any copyrighted source(s), and they agree to supply such written permission(s) to Journal of Mechanical Engineering and Technology upon request.
