Study Of Failure Loads Of Carbon Epoxy Composite Plates With Single Pin Holes
DOI:
https://doi.org/10.2022/jmet.v7i2.385Abstract
This paper deals with the study of failure loads of carbon epoxy composite plates with a circular hole subjected to a traction force by a rigid pin using mathematical model. These are investigated for two variables, the ratio of distance from the free edge of the plate (E) to the diameter of the hole (D) and the ratio of width of the plate (W) to the diameter of the hole (D). The effect of joint geometry on the failure loads has been studied and a comparison of experimental, numerical and mathematical models is made. The results obtained by mathematical model are found to be close to the experimental results.
Downloads
Downloads
Published
Issue
Section
License
JMET Copyright Principles
JMET seeks to retain copyright of the articles it publishes, without the authors giving up their right to use their own material.
Originality
The manuscript is neither been published before, nor is it under consideration for publication in any other journals. It contains no matter that is scandalous, obscene, libelous or otherwise contrary to law.
Terms of Acceptance
When the article is accepted for publication, the authors shall hereby agree to transfer to the Journal of Mechanical Engineering and Technology, all rights, including those pertaining to electronic forms and transmissions, under existing copyright laws, except for the following, which the author(s) specifically retain(s):
All proprietary right other than copyright, such as patent rights.
- The right to make further copies of all or part of the published article for my/our use in classroom teaching.
- The right to reuse all or part of this material in a compilation of my/our own works or in a textbook of which I/we am/are the author(s).
- The right to make copies of the published work for internal distribution within the institution that employs me/us.
The authors agree that copies made under these circumstances will continue to carry the copyright notice that appeared in the original published work. The authors agree to inform any co-authors, if any, of the above terms. The authors certify that they have obtained written permission for the use of text, tables, and/or illustrations from any copyrighted source(s), and they agree to supply such written permission(s) to Journal of Mechanical Engineering and Technology upon request.
