VIBRATION CONTROL OF A GANTRY CRANE SYSTEM USING

Authors

  • Azdiana Azdiana Universiti Teknikal Malaysia Melaka
  • Noor Asyikin Universiti Teknikal Malaysia Melaka
  • Sharatul Izah Universiti Teknikal Malaysia Melaka
  • Nur Alisa Universiti Teknikal Malaysia Melaka

DOI:

https://doi.org/10.2022/jmet.v1i1.336

Abstract

The use of gantry crane system for transporting payload is very common in industrial application. However, moving the payload using the crane is not easy task especially when strict specifications on the swing angle and on the transfer time need to be satisfied. To overcome this problem a dynamic feedback swing controller is designed for the gantry position and speed, as well as the load angle and angular velocity using PID controller. Simulated responses of the position of the trolley and sway angle of the mass are presented using MATLAB. The performance of the Bangbang torque input function and the feedback swing controller are compared. From the simulation results, satisfactory vibration reduction of a crane system has been achieved using the proposed method.

Downloads

Download data is not yet available.

Downloads

Issue

Vol. 1 No. 1

Section

Others

License

JMET Copyright Principles
 
JMET seeks to retain copyright of the articles it publishes, without the authors giving up their right to use their own material.

Originality

The manuscript is neither been published before, nor is it under consideration for publication in any other journals. It contains no matter that is scandalous, obscene, libelous or otherwise contrary to law.

Terms of Acceptance 

When the article is accepted for publication, the authors shall hereby agree to transfer to the Journal of Mechanical Engineering and Technology, all rights, including those pertaining to electronic forms and transmissions, under existing copyright laws, except for the following, which the author(s) specifically retain(s):

 All proprietary right other than copyright, such as patent rights.

  1. The right to make further copies of all or part of the published article for my/our use in classroom teaching.
  2. The right to reuse all or part of this material in a compilation of my/our own works or in a textbook of which I/we am/are the author(s).
  3. The right to make copies of the published work for internal distribution within the institution that employs me/us.

The authors agree that copies made under these circumstances will continue to carry the copyright notice that appeared in the original published work. The authors agree to inform any co-authors, if any, of the above terms. The authors certify that they have obtained written permission for the use of text, tables, and/or illustrations from any copyrighted source(s), and they agree to supply such written permission(s) to Journal of Mechanical Engineering and Technology upon request.